L395 Dynamic Range

 40 W/cm2

Operating Range

400 mW/cm2 to 40 W/cm2 Note: Operating Range provides best performance. Units   will　　“turn on” and display data at much lower   irradiance values

Spatial Response

Approximately cosine

Accuracy

±10% of reading plus ±0.2% of full scale　Typical ±5% or better

Repeatability

± 1-3% typical; dependent   on source and equipment (conveyor) stability, unit alone better　than 1%

Smooth Modes

 Smooth ON: Effective Sample rate of 25   samples/second　Smooth OFF: Effective Sample rate of 2048   samples/second　Smooth PROFILER: Effective Sample rate of   128 samples/second

Sample Rate for　Profiling

The LEDCure Profiler uses a fixed sample rate of 128   samples/second for profiling. For　best matching between instrument display and PowerView   Software? II values, use　Smooth PROFILER mode

Memory Capacity　For Profiling

The memory capacity of the LEDCure in Profiler Mode is   sufficient to collect data for　>100 minutes

PowerView　SoftwareR II

National Instruments LabVIEW based programming designed   for Windows XP, Windows　NT, Windows Vista and Windows 7-10.   Collected data stored in LabVIEW based *.tdms　files

Display

Easy to Read, Yellow Text on Black Background, Display   Brightness User Adjustable

Operating　Temperature

0-75°C Internal temperature; withstands high   external temperatures for short periods　(audible alarm indicates when temperature has exceeded   upper limit )

Time-Out   Period

2 minutes DISPLAY mode (no key activity)

Battery/Battery Life

2 user-replaceable AAA Alkaline Cells, Approximately 20   hours with display on

Instrument Dimensions　and Materials

4.60 x 0.50   inches; 117 mm x 12.7 mm (D x H), Aluminum & Stainless Steel

Instrument   Weight

10.1 ounces (289   grams)

Carrying Case

 Supplied with carrying case, cut   polyurethane foam interior, scuff resistant nylon exterior　cover, Size: 10.75 x 3.5 x 7.75 inches;   274 x 89 x 197 mm (W x H x D), Weight: 9 ounces　(260 grams)